Firmware image 084A6 in .bin form, 8.00 MB, marked .dec, which often denotes a decrypted BIOS dump. Nothing in the name identifies the laptop, board number or vendor, so treat it with care and match it against the hardware before use. An 8 MB file corresponds to a 64 Mbit SPI flash chip and can be programmed with a common SPI programmer. Read and save the original chip first, verify the write after flashing, and compare with similar 084A dumps to rule out a mismatch with your board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @skclappybios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →