Firmware image titled 089B7, 16.0 MB in raw .bin format, with nothing in the name beyond what may be a hex board or system ID. The size corresponds to a 128 Mbit SPI flash device. Since the target hardware is not stated, confirm compatibility from the board itself before flashing. Common use is recovering a corrupted BIOS with an external programmer and clip; back up the existing chip first to preserve unique data, and verify the write after programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @technodev_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →