Raw flash image of 3.79 MB in .bin format labelled MS-4000, with no version, date or chip type given in the name. It is most likely a full memory dump from a satellite receiver of that model, used to revive a box that is stuck on boot or dead after a bad update. Identify the flash chip on the mainboard and compare its capacity with the image before writing it with an SPI programmer. Always read and store the current chip contents first, since configuration data may differ between units.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tamirkaran_chanel. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →