Intel Management Engine firmware 11.8.60.3560 for consumer H chipsets, D0 stepping, production signed, in the extracted form rather than a configured region. ME 11.x covers Skylake and Kaby Lake platforms. An extracted image is normally loaded into Intel Flash Image Tool to build a proper ME region before it goes into a BIOS dump. Do not flash it raw to the SPI chip. Verify the SKU and chipset match your board, and keep a copy of the original firmware in case the rebuilt image fails.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Apr 2019 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →