Clean Intel ME firmware region, version 11.8.60.3561, consumer SKU for H series chipsets, D0 stepping, production build. It belongs to the ME 11 generation found on 100 and 200 series desktop and mobile H platforms. A repair technician uses it to replace a damaged or dirty ME region inside a full BIOS image, typically with Intel FIT, then flashes the result with a programmer. Make sure the chipset type and stepping fit the board, and back up the original chip before writing the rebuilt image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Apr 2019 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →