ROM firmware image of 1023 KB identified only by the string 12632-R207018M0N1, which does not clearly state a device, brand or board number. The odd size, just under 1 MB, may mean the dump is trimmed or incomplete, so compare it with the capacity of the target SPI flash before programming. Inspect the contents with a hex editor or a BIOS tool to identify the platform. Always read and save the original chip with your programmer first, and verify the write after flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @opendatasheet. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @opendatasheet | 21 Jan 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rom file
A BIOS image as shipped by the vendor (commonly AMI) — often the BIOS region only, without descriptor or ME.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →