Display EDID-sized dump of 256 bytes named for a 13.3-inch WXGA panel, typically 1280x800; the file name gives no vendor, part number or notebook model. Technicians use generic images like this when a panel EEPROM is blank or corrupted and the system shows no picture or the wrong resolution. Writing is done over I2C with a CH341-style programmer or a software EDID tool. Confirm the panel resolution and interface first, back up the current EEPROM, and verify the checksum after flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →