ME firmware image version 14.0.47.1516, Consumer edition for H-series chipsets (H_A), production signed and extracted, roughly 2.83 MB. It represents only the ME partition of the flash and has to be integrated into a full BIOS dump, for example with Intel FIT or by using a clean-ME tool. Common use is repairing boards with a corrupted Management Engine region. Make sure the platform and SKU match, check versions with ME Analyzer, and keep an untouched backup of the original chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →