ME firmware 14.0.47.1558, Consumer SKU for LP low-power platforms (LP_BA), production extracted image of about 2.77 MB. It covers only the Management Engine area of the SPI flash, so it must be combined with the rest of the BIOS before programming. Useful when a laptop dump has a broken ME region and the machine shuts down, will not boot or reports firmware errors. Check LP versus H platform, keep the version aligned with the original, and save the factory dump first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →