Firmware for Inventec board 6050A3178801-MB-A01 at revision A1, project Hagrid 2.0, a 14-inch AMD FP5 design with GDDR5 dedicated graphics as noted in the name. DaliPCO refers to the AMD Dali APU. The RAR archive is 7.00 MB. Inventec uses the 6050A numbering for its PCB part numbers, common on HP laptops. Verify the board label and revision, keep a backup of the original SPI chip, and confirm the image matches the flash size before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Feb 2024 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
| @dtechbios | 1 Sept 2024 | Open file on RM Schematics |
| @dtechbios | 26 Feb 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →