Intel CSME firmware image, version 15.0.2.1377, in the Consumer (CON) low-power (LP) build for PCH stepping B, production signed. The RGN tag marks a clean regional image rather than one pulled from a configured BIOS, and the trailing hex string is most likely a checksum of the file. At 2.98 MB it is an ME region payload, not a full SPI dump. Technicians feed it to Intel Flash Image Tool to rebuild a corrupted ME region, then check the result with ME Analyzer before flashing with a programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →