Stock RGN region of Intel CSME Consumer firmware, build 15.0.22.1680, for an H-series PCH at stepping A, production signed, 2.99 MB. Clean region images like this are often the starting point for a fresh ME rebuild when a board's ME is corrupted. Configure and merge it with the original descriptor and BIOS in Intel Flash Image Tool, then program the SPI chip. Always back up the original flash first and confirm Consumer H hardware before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →