Management Engine Corporate firmware, version 15.0.23.1706, built for the H PCH at stepping A, production signed, extracted copy of about 9.90 MB. It contains the ME region only. Typical repair use is restoring a damaged ME region after a failed BIOS update or chip replacement, by assembling a complete image in Intel Flash Image Tool. Read and back up the existing SPI flash first, confirm the board is a Corporate H platform, and check the ME version after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →