Consumer Intel CSME firmware from the 15.0.23 branch, build 15.0.23.1838, for the H PCH at stepping A, production, extracted, 3.00 MB. Only the ME region is present, so the BIOS and descriptor must come from the board's own dump. Technicians load it into Intel Flash Image Tool to create a full image, then program the SPI chip. Use the 15.0.23 branch only where it suits the board, keep the original dump safe, and confirm Consumer H hardware before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →