Consumer CSME firmware, 15.0.30.1716, as a stock RGN region for an H-series PCH at stepping A, production build, 2.99 MB. Being an unconfigured region, it normally needs Intel Flash Image Tool to apply board settings and combine it with the descriptor and BIOS from the original flash. This is a common fix for ME errors or boot loops after a failed update. Read the chip twice with a programmer to confirm a good backup, and check the chipset SKU before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →