Consumer-edition Intel CSME firmware, build 15.0.30.1792, prepared for an H-type PCH at stepping A and marked as a production image. EXTR indicates an extracted copy rather than a clean region file. At 2.99 MB it is only the ME portion, not a complete BIOS dump, so it must be merged into a full flash image, normally with Intel Flash Image Tool, before programming. Confirm that the board uses a Consumer H chipset, keep a backup of the original SPI contents, and verify the result after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →