Stock Consumer ME region (RGN) for H-series chipsets, firmware 15.0.35.1932, stepping B, production signed. At 2.97 MB the raw binary matches a typical consumer ME region taken from a vendor flash image. Repair technicians write such a region into a BIOS dump to fix a broken ME, for example when a board reboots in a loop or reports ME errors. Check the chipset type and SKU against the board, read the original SPI chip with a programmer, and store that dump before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →