Firmware for the HP 15-D018TU on the OSAMU2 board, marked CR-HPC MV MB V1, taken from a Winbond W25Q32 flash chip. The W25Q32 is a 32 Mbit (4 MB) SPI NOR part, so the image inside should be 4 MB. Programmers such as the CH341A support it with a SOIC-8 clip or after desoldering. Check the chip marking on your board, and back up the existing data before erasing and writing. Mismatched board markings are a common cause of failed recoveries.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →