Firmware dump whose name gives only the number 1510, with no brand, board number or status, so the target device must be confirmed independently. The 1 MB size matches an 8 Mbit SPI flash chip, a capacity common on older notebook and desktop boards as well as secondary controller chips. Read the chip markings and device label before using it, make a full backup of the original contents with your programmer, and verify the written data after programming to rule out a bad contact on the clip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosbigarchives. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →