Consumer Intel ME firmware, version 16.0.15.1662, for LP mobile chipsets, A stepping, production build. The RGN tag usually marks a stock region image rather than an extracted one. It is 2.94 MB and belongs to the Alder Lake CSME 16.0 line. It is meant for building a clean ME region with Intel Flash Image Tool for insertion into a full SPI dump. Confirm the board uses Consumer LP ME, and always save the original chip contents before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →