Consumer LP Intel CSME image, version 16.1.25.2124, production build for stepping A, with an extra Y suffix in the name whose meaning is not stated. The extracted region is 3.73 MB and holds the Management Engine only, not BIOS code. Use it to replace or clean a faulty ME section when rebuilding an SPI dump, typically with Intel FIT. Before flashing, confirm the platform and SKU match the board's original firmware with an ME analysis utility, and read and archive the existing chip contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @Satale_bios_esquemas_Laptop. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @Satale_bios_esquemas_Laptop | 1 Feb 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
| @laptexlaptopbios | 25 May 2025 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Jun 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →