17 WUXGA LA-2171P Ltn170wu1-L01 K9922

BIOS .bin 512 B Shared

Display EDID dump for a 17-inch WUXGA panel coded LTN170WU1-L01, associated with motherboard LA-2171P and carrying the extra tag K9922. LA-xxxx numbers follow Compal's board-numbering pattern, so the laptop was built by that ODM whatever brand it sold under. The file is 512 bytes, which may mean a larger EEPROM or a read with padding, so check the capacity of your chip. Use it to restore panel identification after corruption, confirming the panel code on the label and backing up the existing data first.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files