Firmware file whose name, 1731BF, gives no model or board information. It is a 128 KB raw binary, a size common for embedded controller or keyboard controller images and small SPI chips. The intended device cannot be determined from the name, so treat the file with caution. Compare its contents and size with the chip you plan to program. Back up the original chip using a programmer before writing, and do not use the image on an unidentified board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →