Version 2.0.0.1045 firmware region of 1.375 MB, labelled PRD and RGN, with no model, brand or board number in the name. Files built this way are typically Intel Management Engine region images in production form, used to rebuild a corrupted ME section inside a complete BIOS dump. A technician should check that the ME generation suits the chipset on the board, merge the region into a full image using an appropriate editor, and back up the existing SPI flash with a programmer before writing anything, since a mismatched ME can cause no-boot or shutdown faults.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →