Firmware region image numbered 2.0.0.2060, 1.375 MB, with PRD and RGN tags that follow Intel Management Engine conventions for a production build packaged as a region file. The name does not specify any motherboard, notebook or chipset. It serves for rewriting the ME portion of an SPI flash when that area is damaged, using a hardware programmer or flash utility. Make a full backup of the chip beforehand, confirm the platform uses this ME generation, and check that the descriptor region size equals the image size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →