Binary firmware, version 2.0.0.2073, 1.375 MB, tagged PRD and RGN, the naming Intel Management Engine firmware uses for a production region image intended for the ME section of the flash. The name gives no clue about the board, laptop or chipset. Keep it for restoring ME firmware on a platform that uses this generation. Before programming with an SPI programmer, dump and archive the full original chip, and confirm that the ME region defined in the flash descriptor has a matching size, otherwise it will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →