Production region image of firmware version 2.0.1.2091, 1.375 MB, as indicated by the PRD and RGN tags typical of Intel Management Engine firmware naming. No hardware model or board number is included, so the file is identified only by version and size. Region files like this are used to rebuild the ME section of an SPI flash after corruption or a bad update. Before programming, read and store the full original chip contents, confirm the platform needs this ME generation, and check that the region size matches exactly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →