Firmware file versioned 2.0.2.3094, 1.375 MB, with the PRD and RGN tags that Intel Management Engine images commonly use for production region files. Nothing in the name identifies the motherboard, laptop or chipset, so treat it as a generic ME image of this version. It can be written into the ME area of an SPI flash with a programmer or a flash tool when restoring corrupted firmware. Always back up the full chip first and verify that the size of the ME region in the descriptor matches this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →