A 1.375 MB firmware region image, version 2.0.2.3095, labelled PRD and RGN. That labelling matches Intel Management Engine firmware packages, where PRD indicates a production build and RGN a ready region image. Which board or platform it belongs to is not stated in the name. Technicians reach for files like this when the ME region is damaged and the system fails to boot or shuts down repeatedly. Read and keep the original SPI contents before flashing, and check the region boundaries in the descriptor before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →