Firmware binary with version 2.0.4.3100, PRD and RGN markers and a 1.375 MB size. In Intel Management Engine firmware collections PRD denotes a production build and RGN a region image ready to occupy the ME area of the flash. The file name identifies no specific motherboard, notebook or chipset. Before use, determine which ME generation the platform needs, back up the original flash contents with an SPI programmer, and confirm the region size matches, since writing the wrong ME firmware can prevent the system from powering up.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →