Firmware image numbered 2.0.5.3109, 1.375 MB in size and marked PRD and RGN. The labels match the Intel Management Engine convention, where PRD is a production build and RGN a region image sized to replace the ME area of the SPI flash. The name does not state the board or system it came from. Compare this version against what the platform originally shipped with, back up the full flash before changing anything, and check that the ME region defined in the descriptor matches the image size so it fits correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →