Binary firmware image, version 2.1.5.3107, 1.375 MB, tagged PRD and RGN. The naming matches that of Intel Management Engine firmware packages, where PRD marks a production build and RGN a region image meant for the ME area of the SPI flash, yet the file does not name a board or platform. Check that the version suits your chipset and firmware generation before use. Program it with a flash tool or SPI programmer only after saving a full backup of the original chip, since a mismatched ME region can block booting.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →