Raw binary firmware image of 16.0 MB, named only with a timestamp and SVOD3, so the device and board are not identified by the name. A 16 MB size corresponds to a 128 Mbit SPI flash chip, common on modern laptop and desktop boards. Such a dump is typically written with a programmer like CH341A or similar. Before using it, check the image content with a hex editor or UEFI tool, confirm it belongs to your board, back up the original chip, and verify the size fits the flash part.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @fixtronix_support_community. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →