Innolux 15.6-inch panel EEPROM dump, with the name giving the model as B9-LOB and the revision as RV C1. The 20181116_164605 string is probably the read timestamp. The file is 256 bytes, the full capacity of a 24C02 chip, as the 24_02 prefix suggests. Writing correct EDID back fixes blank screens and wrong resolution caused by corrupted panel data. Match the model and revision printed on the panel exactly. Use an EDID viewer to check the content, then read and save the existing chip before programming with a serial EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →