24 02 20181204 LG 140WD1 LT M1

BIOS .bin 256 B Shared

LG 140WD1 LCD panel EDID image, marked LT M1 and dated 20181204 in the name, which is most likely the date the dump was read. The data is 256 bytes, matching a 24C02 serial EEPROM, as the 24_02 prefix suggests. Repair shops reflash this kind of file onto the panel's onboard EEPROM when a corrupted EDID leaves the display undetected or showing the wrong mode. Open it in an EDID viewer to check timings and the checksum. Match the panel code and suffix on its label, and back up the current chip before programming.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

All sources (4)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files