EDID dump for an AUO B101AW03 V.0 LCD panel, a 10.1-inch class display going by the model code. At 256 bytes it matches the full capacity of a 24C02 serial EEPROM, which the 24_02 prefix in the name most likely refers to. Technicians write such an image back to the panel EEPROM when the stored EDID is corrupted and the screen shows no picture, a wrong resolution or no identification. Read and save the original contents with a programmer first, and confirm that the panel label matches the model and revision.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →