A 256-byte EDID image for the Innolux BT156GW01 panel, revision V3, from a 24C02 EEPROM per the 24_02 prefix. The trailing HHHHHH in the name is unexplained and may mark an edited or alternative copy, so compare it with the plain V3 dump if both are available. EDID tells the graphics controller how to drive the panel, and a corrupted chip leads to blank or misdetected displays. Verify the panel label, keep a backup of the existing EEPROM contents, and program using an I2C-capable tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →