EDID data for an IVO M101NWT2 panel, firmware marking 0.0, 256 bytes long and taken from a 24C02-type EEPROM judging by the 24_02 prefix. IVO is the usual abbreviation for InfoVision Optoelectronics, a panel maker. The file restores the identification table that the host graphics reads to learn the native resolution and timings. Use it when a panel shows a black screen or is misdetected after its EEPROM lost data. Check the panel label matches M101NWT2, keep a backup of the original contents, and program with an I2C tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →