Here is a 256-byte EDID dump for an LG panel written as LP 15.6WH4, revision C1, presumably the LP156WH4 model, from a 24C02-sized EEPROM indicated by the 24_02 prefix. The block contains vendor code, product ID and timing information the graphics controller needs to drive the screen correctly. When it is corrupt, the laptop may show no picture or only a fallback resolution. Confirm the panel part number and C1 revision on its label, read the existing chip first, and flash this file with a 24-series capable programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →