LG LP156WH2 LCD panel, revision A1: a 256-byte EDID image matching the capacity of a 24C02 EEPROM, as the 24_02 prefix suggests. The panel's EEPROM stores this identification table and passes it to the graphics hardware over DDC, so damaged contents can break detection or resolution selection. It serves for restoring a panel to its proper identity after a bad flash or data loss. Revisions differ, so confirm A1 on the panel sticker, save what the chip holds now, and program it with an I2C EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →