EDID firmware of 256 bytes for an LG 156WH2 panel at revision E1, with the 24_02 prefix pointing to a 24C02 serial EEPROM as the source chip. The name most likely refers to the LG Display LP156WH2 family, though only 156WH2 is written. The file holds the manufacturer ID, timing data and resolution the laptop reads at startup. Technicians use it when a panel stays black or is detected wrongly after EEPROM corruption. Check the exact model and E1 revision on the label and back up the original chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →