LG Display LP101WS1 panel, revision A2, as a 256-byte EDID binary; the 24_02 prefix indicates a 24C02 EEPROM, which is 256 bytes and matches the size. This identification data is read by the graphics controller over the DDC lines to pick correct timings. Writing it back cures display faults caused by a blank or corrupted EEPROM, such as no image or a generic monitor entry. Verify LP101WS1 A2 on the panel sticker, dump the current chip contents for safety, then program it with a CH341A or similar EEPROM tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →