Samsung LTN101NT02 display EDID, a 10.1-inch class panel by the model code, stored as a 256-byte binary. The size matches a 24C02 EEPROM, which the 24_02 at the start of the name indicates. Repairers flash this kind of image to the panel's onboard EEPROM to restore correct identification after corruption, which shows up as no picture or a wrong resolution. Different suffixes of the same panel can hold different data, so check the full code on the label, and back up the chip before writing the replacement image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →