A 2 KB dump for the Samsung LTN101NT08 panel, variant 808, most likely taken from a 24C16 EEPROM, as the 24_16 prefix and the file size suggest. The EDID block inside reports vendor, model, timings and native resolution to the laptop graphics. Reflashing it is a common fix when a panel lights up but shows nothing, or the system reports an unknown display. Select the correct 24C16 chip type in the programmer software, make sure the panel matches LTN101NT08, and preserve a backup of the original data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →