EC firmware dump of 128 KB for a 310S-14IKB laptop, board LA-E221P revision 1.0, a Compal design; the BIUS4 S5 tokens are part of the board or project naming. Embedded controller firmware handles power buttons, charging, fans and keyboard, so a corrupt EC can cause a no-power or no-charge fault. Write it with a programmer to the EC flash or chip as appropriate. Back up the existing contents first and confirm the board revision matches before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 7 Oct 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →