Raw 1.00 MB BIOS image named 41RQ read, which most likely means it was dumped from a working chip with an SPI or parallel programmer. Apart from the 41RQ code, the name says nothing about the manufacturer, model or board. Treat it as unverified until a hex editor shows matching identification strings. Before writing, save a full read of the chip on the board, make sure the flash is 8 Mbit (1 MB), and verify the write afterwards so a bad flash can be restored.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptopdesktopbiosbin. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →