Fourth copy of the 450 G1 GRAFX firmware image, 8.00 MB in .bin format. The tag points to the graphics-equipped variant, while the name leaves out brand, GPU model and motherboard number. With several copies in the set, a hex comparison shows whether they are identical or carry different data. The image suits a 64 Mbit SPI flash. Back up the original chip, confirm the hardware version, then program and verify with your programmer software.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →