Tested BIOS and EC firmware for the Clevo board 6-71-W5S20, revision D03, with an 8 MB system image and a 128 KB embedded controller file. The 6-71-xxxxx format is Clevo's own mainboard numbering, used across many rebranded notebooks. Program the 8 MB image into the BIOS SPI chip and the 128 KB image into the EC flash, each with a suitable programmer. Read and save both original chips first, and check that the board number and revision on the PCB match before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →