Tested raw BIOS image for motherboard 6050A2466401-MB-A03, an Inventec / Foxconn style number with revision A03. The 16 MB uncompressed .bin size corresponds to a 128 Mbit SPI flash chip, so check that the chip on your board has that capacity before writing. Use a programmer such as a CH341A or RT809 to flash it when a board will not start. Always dump and keep the original chip first, since it may contain serial numbers and other unique data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ITHINKHS. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →