BIOS dump of 16 MB for board 6050A2566302 at revision MB-A03, reported fully working by the source. The number uses the Inventec / Foxconn 6050A scheme, where the trailing MB-A0x marks the board revision, so check that the label on your PCB carries the same revision before flashing. A 16 MB image corresponds to a 128 Mbit SPI chip; if your chip is smaller, the file will not fit. Back up the existing chip contents with your programmer, write the image, then verify against the file before reassembling.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →